J.A.M. Selections
Connector
NKS/NKW Connector (2.0mm Pitch)
| ●Further miniaturized design of high performance connector for Automobile industry. ●Demonstrates high performance of Vibration resistance, Impact resistance and High temperature resistance, required for in-vehicle devices. ●The solder peg assembled in wafer connector greatly enhances the peel strength of the printed circuit board. ●Side retainer concept prevents incomplete insertion of contacts into the housing and significantly enhances the wire tensile strength. ●Ensuring light operability with soft inner lock concept. |
 *The image is KNS（Single）
|
Semi Automatic Seal Insertion and Crimping Machine
TSSC02
| Simultaneous process for 2-core cable
●Min. sheath removal length TSSC02:50mm (included wire tip cut) |
 |
Hydraulic Press with certified type approval (K Series)
HYP-HK
| Equipped with two solenoids for raising and lowering. Type approval no. No. TK517 ●Equipped with double solenoids for raising and lowering. The specifications ensure that even if a malfunction occurs while one of the solenoids is ON,the press will not operate if the other is OFF. ●A relay unit is added for two-handed operation, and if the left and right hand switches are not pressed within 0.5 seconds, there is no output signal from the relay unit and the press will not operate. ●Applicable models: HYP305HK, HYP505HK, HYP505DK, HYP1000K, HYP1500K |
 |
Both Side Clamping System Vise
MF80W
| The MF series, the repeated positioning is within 0.005 in system. ●Strongest in series, 10kN clamping power. ●Built for inclined CNC round table mounting. ●All parts made of special hardened stainless steel, excelling in corrosion and wear resistance. ●JAM original structure makes the center position of bed surface flat and stable when fastened. ●Replaceable cap plate comes in numerous variations. |
 |
